Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Commerce, CA
Garage door installation in Commerce, CA starts around $700 for a basic single door and climbs past $2,200 for insulated, custom, or commercial-grade steel. Most homes here are mid-century stucco builds with narrow driveways, low-clearance openings, and decades-old hardware that heat and freight traffic have taken a toll on. Whether you need a full replacement on a 1950s single-car or a roll-up for a warehouse bay off Bandini, we handle the whole job: door, tracks, opener, and seal. Call (844) 766-3083 for a free, written estimate. Home page.
Why Commerce Homes Are Different
Commerce sits in the freight-and-warehouse belt of southeast LA County, where the same street might have a family’s 1950s single-car wood door next to a loading dock’s rolling steel service door. That mix shapes the work we do. Older homes near Rosewood and Bandini often still have original low-headroom garage framing, which means a modern high-lift retrofit or opener install needs custom brackets rather than off-the-shelf hardware. Heat is the bigger problem. Summers here are hot and dry, and that sun exposure bakes steel panels, warps wood doors, and fatigues torsion springs faster than coastal neighborhoods. Add in Santa Ana wind events pushing dust and grit into tracks and rollers, and you get a garage door that grinds and binds in ways a garage in, say, Pasadena wouldn’t. The solution is usually a heavier-duty spring cycle, sealed bearings, and weatherstripping that actually seats against a dusty, uneven concrete slab. We see all of it in Commerce, and we plan for it on every job.
Styles & brands we work with
Our Main Commerce Services
Two jobs dominate the calls we take from Commerce: repairing doors that won’t open or close, and repairing the openers that drive them. Here’s what each involves.
Garage Door Repair in Commerce
Broken springs, snapped cables, dented panels, and rollers that sound like gravel in a coffee can are all common calls from Commerce. The city’s older stucco homes often have original hardware that’s reached the end of its service life, while the industrial buildings along the freight corridors put heavy daily cycles on their roll-ups. We fix both. A repair call starts with a full inspection of the door’s balance, tracks, springs, and hinges before we touch anything. You’ll know what’s wrong, what it costs to fix, and whether a patch job makes sense or a panel replacement is the smarter spend. More detail is on the Garage Door Repair in Commerce page.
Garage Door Opener Repair in Commerce
If the door won’t move but the springs and cables look fine, the opener is usually the culprit. We work on motors, logic boards, safety sensors, remotes, keypads, and wall buttons across the major brands, including Chamberlain, Genie, and LiftMaster. Heat and dust inside a Commerce garage shorten the life of opener gears and drive belts, especially if the unit is original equipment from the late 1990s or early 2000s. We diagnose first, recommend second, and if the fix doesn’t make sense, we’ll tell you plainly that a new opener install is the better money. Full breakdown on the Garage Door Opener Repair in Commerce page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Commerce
Garage Door Installation in Commerce is usually a replacement job, not new construction. The city’s housing stock is overwhelmingly mid-century stucco with single-car garages on narrow lots, and the original doors have reached the end of their life. Installing a new sectional door on a 1950s opening isn’t a drop-in swap: the framing is often low-headroom, the slab has settled out of level, and the old tracks may not match any modern door on the rack. We measure the opening, check the headroom and side clearances, level the bottom, and order the door that fits what’s actually there rather than forcing a stock size. For the full scope of the install service, see Garage Door Installation.
Garage Door Replacement
Signs you need it
Multiple rusted or punched-through panels, a door that sags in the middle, or repeated spring failures on an old door are signs that replacing the whole door costs less over three years than continuing to patch it.
What it costs in Commerce
Garage door replacement in Commerce lands between $700 and $2,200 depending on size, insulation, and whether the frame needs rework.
How we do it
We remove the old door and tracks, inspect the opening for level and bolt condition, install new track and brackets, hang and balance the new panels, then set the springs and test the full travel.
Garage Door Installation Service
Signs you need it
A door that’s been off its tracks more than once, a frame that’s visibly out of square, or an opener that keeps burning out because the door is too heavy for it all point to a full installation rather than another adjustment.
What it costs in Commerce
A complete installation service call, including new track, hardware, springs, and labor, runs $700 – $2,200 for a new door installation on a standard single or double opening.
How we do it
We confirm the opening dimensions and headroom, remove the existing assembly, set new horizontal and vertical track, install the bottom seal and rollers, mount the door sections, and then tension the springs to match the door’s exact weight.
Garage Door Seal Installation
Signs you need it
Daylight under the door, wind-blown dust and leaves in the garage, or water stains on the floor after rain all mean the bottom seal or side seals have gone hard and flat.
What it costs in Commerce
A seal installation is included with most full installations, but as a standalone fix on an existing door it’s part of the $150 – $600 general repair range, not a big-ticket item.
How we do it
We pull the old seal, clean the bottom retainer channel, cut the new vinyl bulb or T-seal to the exact door width, and feed it through so it compresses evenly against the slab.
What Garage Door Installation Costs in Commerce
| Item | Typical range in Commerce |
|---|---|
| New door installation (single) | $700 – $1,400 |
| New door installation (double) | $1,200 – $2,200 |
| Opener installation | $250 – $550 |
Do I need a permit to install a garage door in Commerce?
Most residential replacements that keep the same opening size don’t require a permit in Commerce, but if you’re widening an opening or converting a garage on a commercial property, the city’s building department will likely want drawings. We can tell you which category your job falls into before any work starts.
Will the price change once you see the door?
No. We quote a fixed price after measuring the opening and inspecting the framing, and that number doesn’t move unless the scope changes at your request. Estimate line items are explained before we order anything.
Brands We Service in Commerce
We service Chamberlain and Genie openers and Clopay and Amarr doors, among others. Whatever brand is on your door, we know it. Our brands page lists the full compatibility range, and common parts for these lines are stocked locally so we don’t lose a day waiting on freight.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Commerce, CA
| Service | Typical range in Commerce |
|---|---|
| Garage door repair | $150 – $600 |
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
The two things that push a Commerce job toward the top of a range are low-headroom framing that needs custom brackets, and heavier-use commercial roll-up doors that call for industrial-grade springs. Whatever the number, it’s quoted and agreed before we start.
Neighborhoods We Serve in Commerce
We work throughout Commerce, from the residential streets around Rosewood Park and Bandini Boulevard to the light-industrial bays south of Washington and the older homes off Eastern Avenue. No neighborhood is too narrow a call for a truck that carries its own stock.
- Rosewood Park area
- Bandini Boulevard corridor
- Washington Boulevard warehouse district
- Eastern Avenue residential blocks
- Citizens International area
Service Area – Cities Near Commerce
Our route regularly covers adjacent southeast LA County cities, so scheduling a job near Commerce is straightforward. We also serve Maywood, CA, Bell, CA, Cudahy, CA, and Bell Gardens, CA. If you’re on the edge of town, just call and we’ll confirm the route for your street.
Serving Commerce, CA — Our Local Coverage Area
We’re based in the Commerce area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Commerce
Most repair callbacks in Commerce are scheduled quickly, often the next business day. The exact window depends on the day’s route and part availability. An emergency is treated as a priority, so call (844) 766-3083 rather than waiting on a web form.
California requires a contractor’s license for any garage door work above a minimal threshold. Elk Grove Garage Door Service is state-licensed and insured, and the same standards apply whether the job is a residential door near Rosewood or a roll-up on a commercial bay.
Yes. Conversions are common in Commerce, and we routinely replace or re-hang doors on buildings that were originally commercial. The opening dimensions and track layout get measured on site, and the door is ordered to fit what’s actually built, not assumed from blueprints.
Call (844) 766-3083 for a free estimate on any garage door or opener job in Commerce. We diagnose first, quote a fixed price, and then do the work with parts matched to your door, not whatever’s easiest to sell.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Commerce Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
— Diego Ramirez"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
— Oscar Mendoza"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
— Lisa Miller